Swimming Pool Liners

DropsPool liners by SINTEC offer premium waterproofing solutions for residential and commercial swimming pools. Manufactured under EN 13956 standards, these reinforced PVC-P membranes ensure long-term durability, UV resistance, anti-fungal protection, and excellent mechanical performance.

PVC-P Membranes Antislip Liners Tile Pattern Liners Waterproofing Systems
Designed for new pool construction and refurbishment projects with long-lasting waterproofing performance.
Swimming Pool Liners

Premium PVC-P Waterproofing Membranes

SINTEC URDIN SPR membranes are reinforced with polyester mesh, UV protected, and designed for long-term waterproofing performance. Available in standard and antislip finishes, they are suitable for mechanical fixation in both new pools and renovations.

  • Flexible PVC-P reinforced with polyester net
  • UV resistant & anti-fungal treatment
  • Excellent mechanical strength
  • Hot-air weldable even years after installation
  • Available in multiple colors & textures
  • Antislip finish available for steps & wet areas

URDIN SPR – Standard Pool Liner

URDIN SPR is a flexible PVC-P membrane reinforced with polyester net. Manufactured under EN 13956 standards, it offers excellent stability, UV protection, and long-term waterproofing performance for swimming pools.

Properties

  • Low migration plasticisers
  • High temperature stability
  • Anti-UV protection
  • Color stabilization
  • Anti-fungus treatment
  • Excellent mechanical properties
  • Hot-air weldable
  • Recyclable material

Technical Specifications

Characteristic Norm Unit Value
ThicknessEN 1849-2mm1.5 (±5%)
ElongationEN 12311-2%≥ 15
Tensile ResistanceEN 12311-2N/mm²≥ 22
Tear StrengthEN 12310-2N≥ 200
Punching ResistanceEN 12730-BKg≥ 20
Joint Peel StrengthEN 12316-2N/50mm≥ 200
Joint Shear StrengthEN 12317-2N/50mm≥ 1000
UV ExposureEN 1297-Pass
Low Temp FoldabilityEN 495-5°CNo cracks
Dimensional StabilityEN 1107-2%≤ 0.5
Micro-organism ResistanceASTM G 21-90-No growth
Hydrostatic PressureEN 1928-B-Watertight
Hail ResistanceEN 13583mm≥ 23

URDIN SPR Antislip

URDIN SPR Antislip is a reinforced PVC-P membrane with an antislip surface finish, ideal for steps, beaches, and wet areas requiring enhanced safety.

Properties

  • Antislip surface finish
  • UV resistant
  • Anti-fungus treatment
  • High mechanical strength
  • Hot-air weldable
  • Suitable for new pools & refurbishments

Pool Liner Tile Collection

SINTEC offers a wide range of decorative liner finishes inspired by natural stone, mosaic, and modern textures. All designs are available in standard and antislip versions.

Available Designs

URE ZERU AKUA HONDAR ELUR BILBAO IKATZ HARRIA GRIS ARABA ARABA GRIS ARABA NEGRO CUBE

Roll Dimensions & Packaging

Type Roll Dimensions Rolls / Pallet m² / Pallet
Unicolor1.65 × 25 m12495 m²
Unicolor Antislip1.65 × 10 m16264 m²
Design1.65 × 25 m12495 m²
Design Antislip1.65 × 10 m16264 m²

Installation Guidelines

SINTEC liners must be installed by qualified professionals to ensure proper waterproofing performance and long-term durability.

  • Recommended installation temperature: +10°C minimum
  • Surfaces must be clean, dry, and free of sharp obtrusions
  • Use geotextile separation layer on bitumen, asphalt, oil, tar, PU or PS insulation
  • Hot-air welding required for membrane joints
  • Check seams using flat-headed punch
  • Adjust welding speed & temperature based on ambient conditions

Packaging & Storage

Store rolls horizontally and parallel — never crossed.

Colour Dimensions Rolls / Pallet Storage
Several 1.60 × 25 m (40 m² / roll) 12 Store in original packaging, dry & cool place

URDIN SPR Antislip

URDIN SPR Antislip is a reinforced PVC-P membrane with an antislip surface finish, ideal for steps, beaches, ramps and wet areas requiring enhanced safety. Manufactured under EN 13956 standards, it provides long-term waterproofing performance with excellent mechanical strength and UV resistance.

Properties

  • Antislip surface finish (EN 13451-1 – Group 24)
  • UV resistant
  • Anti-fungus treatment
  • High mechanical strength
  • Hot-air weldable even years after installation
  • Suitable for new pools & refurbishments
  • Reinforced with polyester mesh

Technical Specifications

Characteristic Norm Unit Value
ThicknessEN 1849-2mm1.5 (±5%)
ElongationEN 12311-2%≥ 15
Tensile ResistanceEN 12311-2N/mm²≥ 22
Tear StrengthEN 12310-2N≥ 200
Static Punching ResistanceEN 12730-BKg≥ 20
Joint Peel StrengthEN 12316-2N/50mm≥ 200
Joint Shear StrengthEN 12317-2N/50mmL,T ≥ 1000
UV ExposureEN 1297-Pass
Low Temp FoldabilityEN 495-5°CNo cracks
Dimensional StabilityEN 1107-2%≤ 0.5
Micro-organism ResistanceASTM G 21-90-No growth
Hydrostatic PressureEN 1928-B-Watertight
Hail ResistanceEN 13583mm≥ 23
Antislip ResistanceEN 13451-1-Group 24

Packaging & Storage

Colour Dimensions Rolls / Pallet Storage
Several 1.50 × 10 m (15 m² / roll) 16 Store horizontally & parallel (never crossed)